Doosan L034 70hp Four Cylinder Naturally Aspirated Heat Exchanger Cooled Marine Diesel Engine With TK190 2.78:1 Reduction Hydraulic Gearbox, Doosan Control Panel & Extension Loom. Choice of two of these units available, both in good running order. One unit was manufactured in 2015 and has run approx. 4,900hrs, the other was manufactured in 2006 and has run approx. 12,000hrs. Both engines have been test run at our works and found to start and run well from cold with no undue exhaust smoke and good oil pressure. Ideal for commercial use or for a heavy dis... read more

Westerbeke 12B-Two 12hp Twin Cylinder Heat Exchanger Cooled Marine Diesel Engine Package With BW7 Gearbox, Control Panel & Loom. Removed in good working order and taken as a PX on a larger Volvo Penta unit. The engine has been test run at our workshops where it started and ran without fault. It has been cosmetically tidied and serviced with new oil and filters. The core engine is a Mitsubishi. Shipping can be arranged anywhere in the UK or Worldwide at buyers cost. Please call 01935 83876 for further details.... read more

Volvo Penta TAMD122D 480hp @ 2050RPM. Six Cylinder Turbo Intercooled with Heat Exchanger Cooling. We have a number of these engines available with remarkably low running hours (sub 3000 from new). Removed from training vessels as part of a planned upgrade. Engines were sea trialled prior to removal and performed without fault in heavy weather. The rear of the engines are fitted with PTO flanges which then drove into V drive Twin Disc gearboxes (also available). PTO Flanges can easily be removed to allow fitment of a suitable conventional gearbox. We hav... read more

Ford Mermaid Mistral (2726T) 175hp Six Cylinder Heat Exchanger Cooled Turbocharged Marine Diesel Engine Fitted With PRM 1000D3 Hydraulic Gearbox. Based on the very last of the Ford Dover engines. This one being a 2726T Otosan unit. This engine was in storage as a spare engine for one of our commercial clients and was reportedly used for around 7 years in a commercial vessel before they obtained and stored it. It has been test run at our workshops for 2 hours where started and ran well from cold. No discernible crank case pressure. All fluids clean and in the prope... read more

Lister Petter LPWS4 36hp Four Cylinder Skin Tank Cooled Marine Diesel Engine With PRM Delta Hydraulic Gearbox, Basic Control Panel & Wiring Loom. Removed from a narrowboat with approx. 2500hrs running time to be replaced with a vintage engine. Tested and serviced at our workshops and ready to go. Shipping can be arranged anywhere in the UK or Worldwide at buyers cost. Please call 01935 83876 for further details.... read more

Bukh DV10 10hp Single Cylinder Marine Diesel Engine Package Complete With Gearbox, Basic Control Panel & Extension Loom. Taken in part exchange against one of our Bukh DV24 engines as the owner wanted a little more power having relocated the boat to an area with fast tidal flow. Starts and runs well from cold with no apparent faults. Fully serviced and repainted and a stainless steel exhaust fitted. Shipping can be arranged anywhere in the UK or Worldwide at buyers cost. Please call 01935 83876 for further details.... read more

BMC 1500 35hp Four Cylinder Keel Cooled Marine Diesel Engine With PRM Delta 20 2:1 Reduction Hydraulic Gearbox. Fully rebuilt at significant cost approx. 4 years ago and in good running order. Tested by our workshops and found to start and run well from cold. A couple of small oil leaks were identified on test and so a number of gaskets and seals were replaced as required. Now serviced and repainted, ready to go back to work. Shipping can be arranged anywhere in the UK or Worldwide at buyers cost. Please call 01935 83876 for further details.... read more

Volvo Penta MD21A 75hp Four Cylinder Naturally Aspirated Heat Exchanger Cooled Marine Diesel Engine With Control Panel & Extension Loom. This engine was replaced as part of a planned upgrade and was fitted with an unusual V drive gearbox which was re-used on the new engine. Can be supplied with a Borg Warner hydraulic gearbox if required. Ideal to replace an existing MD21A or AQD21A unit. The engine has been test run and started well from cold without any apparent faults. Exhaust manifold has been cleaned out and new gaskets fitted on the end plates. No... read more

Nanni 2.50HE 10hp Twin Cylinder Heat Exchanger Cooled Marine Diesel Engine Package With TMC40 2:1 Gearbox, Control Panel, Wiring Loom & Engine Mountings. We have two of these units available, removed as part of a planned upgrade and in very good running order when removed. Only ever operated in fresh water so heat exchangers in good shape. Based on the well respected Kubota Z482 base engine, these are great little motors, very compact and light weight. These two units were fitted new in 2003 and have run approx. 2500hrs. In industrial applications these little Kubota engines are capabl... read more

Nanni 4.220HE 40hp Four Cylinder Heat Exchanger Cooled Marine Diesel Engine Package With PRM 160 3:1 Hydraulic Gearbox. Perfect for replacing old Perkins 4107 & 4108, BMC 1500 & 1800 etc. We have two of these units available, removed as part of a planned upgrade and in very good running order when removed. They have spent their life working in fresh water so corrosion free and in good shape. The base engine for these is from the very well respected Kubota. These two units were fitted new in approx. 2002 and have run approx. 3000hrs so not a lot considering most industrial Ku... read more