Built in around 1980. GRP construction with GRP hull, twin keels, aft cockpit with tiller steering, Bermudan sloop rig, 5 berth interior in 2 cabins with standing headroom. BUILDER: Colvic Craft DIMENSIONS: LOA 26' 0" (7.9m) Beam 9' 0" (2.7m) LWL 21’3” (6.46m) Draft 3' 6" (1.1m) Displacement approx 6,000lbs 1980, roomy Colvic Sailer 26 with recent Beta 20 3 cylinder diesel, furling genoa, 5 berths, separate heads, headroom, tillerpilot, GPS, Clipper Duet sounder and log. MECHANICAL Beta Marine 20, 3 cylinder 20hp diesel inboard with alternator charging to 2 x 12v b... read more

1984. GRP construction with black topsides, part GRP moulding for deck and hull, encapsulated keel, ballasted with concrete and steel punchings, aft self draining cockpit, transom hung rudder, 2 berth interior, gaff cutter rig. Hatch renewed in 2018, runners needs replacing. BUILDER Designed by Paul Gartside and built by Riverside Products, Penryn. Sail no OY16 15 DIMENSIONS: Length on deck (LOD): 16.00 ft Length over spars (LOS): 22.00 ft Length on waterline (LWL): 15.75 ft Beam: 6.50 ft Draft: 3.00 ft Displacement: 1,600.00kg Oysterman 16 designed by Canadian Paul Gartside, along the ... read more

The vessel is a standard production MG38. Aft cockpit, GRP construction with lead fin keel and balanced spade rudder. It has a fractional rig with keel stepped mast. The hull is solid GRP stiffened with bonded bulkheads, longitudinal and transverse stringers, and heavyweight scantlings. The deck is GRP sandwich construction with non-slip moulded surfaces. Steering is via a Whitlock Cobra Pedestal with direct push rod linkage to steering quadrant. The rudder stock is Aluminium and the lower bush was replaced in 2015. The upper self aligning bearing was re-manufactured in 2012. The cockpit h... read more

Built in 1987. GRP construction with white topsides and superstructure, long keel with transom hung rudder attached to base of keel, hull epoxy coated below the waterline from new, encapsulated lead keel. Twin unstayed masts converted to Bermudan rig in 2011/12. Aft cockpit with wheel steering and 6 berth internal layout with approx 6ft standing headroom. BUILDER: Designed by Garry Hoyt and built by Freedom Yachts, Falmouth. DIMENSIONS: LOA 34' 10" (10.6m) Beam 11' 0" (3.4m) LWL 30’ (9.1m) ... read more

Built in 1985. GRP construction with “off white” topsides and superstructure, red cove line and boot top, long keel with encapsulated lead ballast, "Coppercoat" underwater coatings with VC Tar epoxy beneath, self draining aft cockpit with tiller steering, teak laid decks and cockpit, Bermudan sloop rig and 3 berth internal layout in 2 cabins with around 6’ maximum standing headroom. BUILDER: Designed by Chuck Paine and built by Victoria Marine. Hull number V268529. Small Ships Registered UK. DIMENSIONS: LOA 26' 0" (7.9m) Beam 8' 1" (2.5m) LWL 23’3” (7.1m... read more

1990. GRP construction with white topsides and superstructure, aft cockpit, flybridge, twin steering, bathing platform with aft gate, 6 berths in 2 cabins plus saloon. BUILDER: Marine Projects. HIN: MPPGB205D990. Build number P4326. DIMENSIONS: LOA 41'0" (12.5m) Beam 13'11" (4.24m) Draft 3'9" (1.14m) Air Draft 11'3" (3.43m) Water Capacity 100g Fuel Capacity 260g Princess 415, stunning example, Twin Volvo TAMD71B 380hp diesels with shaft drive, 9.7kva generator, Eberspacher heating, 2 heads with showers, 2014 survey, new Raymarine instruments, great live aboard or family cruiser! MECHA... read more

Built in 1987. GRP construction with white topsides and superstructure, teak cockpit grating, tiller steering mounted on transom, twin bilge keel, bermudan sloop rig, 5 berth internal layout. BUILDER: E Birch, Canvey Yacht Builder, Canvey Island, Essex. LOA 26'3" 8m LWL 22'0" Beam 8'2" Draft 3'1" Displ 4300lbs approx 1987, late Jaguar 25, twin keel, Volvo Penta 2001 9hp diesel (reconditioned by Volvo main dealer in 2014 and new saildrive diaphragm fitted), standing rigging renewed 2011, new cooker 2010, lovely boat, 2 owners from new! MECHANICAL Volvo Penta 2001 single cylinder 9hp in... read more

Built in 1982. GRP construction with off white topsides and superstructure. Aft cockpit with seating. 2 Berth cabin with 2 further cockpit berths. BUILDER: Fairline Boats Plc. DIMENSIONS: LOA 21'5" 6.53m Beam 8'1" 2.47m Draft 2'8" 0.81m Displ 1750 kg dry weight 1982, Fairline 21 Weekender with Volvo Penta AQ225D 5.0 Litre V8 (Reconditioned engine fitted 2009) with Volvo Penta 280B outdrive, 20 knots cruising. Lots of upgrades over the years with new hood 2012, new interior 2012, new cooker 2018 and lots more! MECHANICAL Volvo Penta AQ225D 5.0 Litre V8 inboard petrol engine (recond... read more

CONSTRUCTION Built in 1971. GRP construction with blue topsides (professional re-spray in 2018), white superstructure, twin bilge keels, self draining aft cockpit with tiller steering, Bermudan sloop rig and 6 berth “A” layout with around 5’11” maximum headroom. BUILDER: Westerly Marine Construction. Hull No K380. DIMENSIONS: LOA 26' 0" (7.9m) Beam 8' 6" (2.6m) LWL 21’4” Draft 3' 0" (0.9m) Headroom 5' 10" Displacement 6700 lbs 1971, Westerly Centaur 26, A layout, Yanmar 2GM20 diesel (1990), epoxied and keels dropped and re-bedded in 1990's, Eberspacher he... read more

Built in 1983. GRP construction with off white topsides and superstructure, lifting keel, self draining aft cockpit with tiller steering, Bermudan sloop rig and 4 berth internal layout in 2 cabins. BUILDER: Kirie Construction, France. Hull ID Number: 9019. DIMENSIONS: LOA 25' 0" (7.5m) Beam 8' 8" (2.7m) LWL 20’6” (6.5m) Draft 2' 6" (0.8m) / 4’6” keel down Fuel tank: 25 litre Water tank: 50 litre 1983, LIFTING keel, Yanmar 1GM10 DIESEL fitted new 2013! New mainsail & roller reefing genoa supplied by Crusader sails in July 2010. Re... read more