Specifications: Year: 1984 LOA: 28' 2" Beam: 9' 2" Draft: 3' 7" Construction: GRP Hull/Keel: Twin HIN: N/A Description: The Mirage 28 was an extremely popular bilge keel family cruiser from the 1970s. The design of the interior utilises the available space very well. The boat benefits from 5'10” headroom in the saloon. The cockpit offers good protection, and the boat can be easily sailed short handed. Engine(s) & Electrical: Yanmar 20hp diesel. Drive type: shaft. Maxi... read more

Specifications: Year: 1977 LOA: 32' Beam: 11' Draft: 4' 6" Construction: Timber Hull/Keel: Fin HIN: N/A Description: 'Taraxacus' is a cold-moulded & sheathed plywood bermudan ketch built in 1977. Designed by Peter Brown as a comfortable cruising vessel with a centre cockpit and open-backed wheelhouse. She has a long fin keel and externally mounted ballast with a short skeg to support the rudder. She has a small transom and moderately raked stern. Engine(s) & El... read more

Specifications: Year: 1989 LOA: 38' Beam: 11' Draft: 5' 6" Construction: Ferro Hull/Keel: Long HIN: N/A Description: This was a Windboats ferro hull which was purchased by a Mr Kavanagh and fitted out to a good standard over a number of years and launched in 1989. There is some documentation about the build of my posession. She was build to a very good standard and used as a liveaboard for the last 12 years though she has been ashore and covered up since 2012. She has been fitted with insulation and ... read more

Specifications: Year: 1985 LOA: 10 m Beam: 3.8 m Draft: 1.22 m Construction: GRP Hull/Keel: Twin HIN: 5192 Description: The Colvic Atlanta design was well received while in production and proved to be a popular alternative to the expensive Fisher 30. Offering considerably more internal volume with a more practical living space it’s easy to understand why. The flared bow sections and relatively low superstructure making the boat easily recognisable. Engine(s) & Electrical: Mercedes 636, 50hp diesel. Eng... read more

Specifications: Year: 1976 LOA: 31' Beam: 9' 6" Draft: 3' 7" Construction: GRP Hull/Keel: Twin HIN: 236 Description: Described in Yachting World as ingenious, the Berwick design continued the immensely successful Giles/Westerly theme of good solid spacious cruisers and the 31 was indeed big enough to provide good accommodation without becoming (by the then standards) too boxy looking. She had the weight and capacity to stay at sea for long extended passages and can be motor-sailed effectively. I... read more

Specifications: Year: 1993 LOA: 9.85 m Beam: 3.12 m Draft: 1.30 m Construction: GRP Hull/Keel: Twin HIN: 33 Description: The Channel 32 was, until the Mystery 35 came along, the largest of the Hunter range. At the time it was awarded RCD Category A certificate (ocean going), and owners have felt comfortable in heavy seas. She is easily handled by two crew (even single handed) but there is room for up to 7 people and she is by far the roomiest of the boats in the Hunter range. 'Soxmox' is a home-completed Chann... read more

Specifications: Year: 1969 LOA: 32' Beam: 9' 3" Draft: 5' 6" Construction: GRP Hull/Keel: Long keel HIN: N/A Description: The Nicholson 32 was designed in 1962 by Peter and Charles Nicholson of Camper & Nicholsons, then one of Britain's most prestigious custom boatbuilders, as a good value mid-sized cruising boat. The Nicholson 32's long-keel hull was a development of the wooden South Coast One Design hull form, and was aimed as a cruiser-racer type. The waterline length ... read more

Specifications: Year: 1982 LOA: 29’ 6” Beam: 10’ 6” Draft: 4’ Construction: GRP Hull/Keel: Twin HIN: N/A Description: The Colvic Sailer 296 is a masthead sloop designed by Ian Anderson and built in fibreglass by Colvic Craft since 1980. The Sailer 296 colvic is a moderate weight sailboat which is very stable / stiff and and has a good righting capability if capsized. It is best suited as a coastal cruiser. Engine(s) & Electrical: Beta 30hp, 3 cylinder diesel (new in 2018). Serial num... read more

Specifications: Year: 1978 LOA: 26’ Beam: 9’ Draft: 3’ 6” Construction: GRP Hull/Keel: Twin HIN: N/A Description: A small family cruising yacht with a surprisingly spacious interior for her size, with twin bilge keels allowing drying out. The Colvic Sailer 26 hulls were designed by David Feltham, and moulded by Colvic Ltd., and sold in quite large numbers both to professional boatyards and to home completers for fitting out. One of the major builders using these hulls was Atlanta, who sold the resu... read more

Specifications: Year: 1980 LOA: 30' Beam: 10' 6" Draft: 4' Construction: GRP Hull / Keel: Fin HIN: N/A Description: "Mr A Primrose never designed a duff yacht, or if he did, no-one showed it to me! Well thought out, strongly built, sea-kindly and secure yachts like the Truman 30 mark out what was perhaps the heyday of British yacht building. Built today they would be eye-wateringly expensive compared to the foreign built offerings designed for a Mediterranean charter market or South German lakes. Th... read more